Spare circulating round for blower-vacuum
Code: BLIM101 BLIM201 BLIM301 BLIM401 BLIM501 BLIM601 BLIM701 BLIM901 Choose variantProduct detailed description
Additional parameters
Category: | Náhradní díly |
---|---|
Warranty: | 0 |
Materiál: | Hliník |

The valve functions as a double vacuum/vacuum breaker with a central common threaded connection, pneumatically actuated by a double acting cylinder; thus it has 2 flat ports, 3...

Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.

Plastic elbow 1"1/4 female thread, PVC 150 mm - pos.6

Safety relief valve, position 2. The safety valve protects against the risk of overpressure at the blower and underpressure at the vacuum pump. Reduces the operating pressure to...

Plastic elbow 2"1/2 female thread, PVC 150 mm - pos.6

PVC plastic nipple, pos. 6

The hose connects the pump to other equipment and reduces vibration and machine temperature. Hose length 1 m.

Safety relief valve, position 2. The safety valve protects against the risk of overpressure at the blower and underpressure at the vacuum pump. Reduces the operating pressure to...

Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...

Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...

The hose connects the pump to other equipment and reduces vibration and machine temperature. Hose length 1 m.

Filter for Blower 2" 1/2, pos. 5 These filters are commonly installed on the suction side of side channel blowers and compressors to protect them from dust and solids that could...

Filter for Blower 1"1/4, pos. 5 These filters are commonly installed on the suction side of side channel blowers and compressors to protect them from dust and solids that could...

It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.

Fine tube diffusers are used in wastewater treatment, sludge aeration, drinking water treatment, fish farming, aquarium farming, etc. It is the discharge and dispersion of...

Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...