Nipl 2" external thread, PVC 90 mm - teat, poz.6
Code: BLKC050PNProduct detailed description
Accessories for Blower (BLOWERS)
Vacuum accessories (EXHAUSTERS)
Additional parameters
Category: | Příslušenství vývěvy Dmychadla |
---|---|
Warranty: | 0 |
Weight: | 0.2 kg |
Materiál: | PVC |
? Připojení : | 2" m vnější závit |
Délka: | 90 mm |

PVC plastic nipple, pos. 6

The hose connects the pump to other equipment and reduces vibration and machine temperature. Hose length 1 m.

Filter for Blower 1"1/2, pos. 5 These filters are commonly installed on the suction side of side channel blowers and compressors to protect them from dust and solids that could...

Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...

Filter for Blower 2", 100 µm, pos. 9

Plastic elbow 2"1/2 female thread, PVC 150 mm - pos.6

Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...

It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.

Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.

Safety relief valve, position 2. The safety valve protects against the risk of overpressure at the blower and underpressure at the vacuum pump. Reduces the operating pressure to...

The valve functions as a double vacuum/vacuum breaker with a central common threaded connection, pneumatically actuated by a double acting cylinder; thus it has 2 flat ports, 3...

Fine membrane diffusers are used in wastewater treatment, sludge aeration, drinking water treatment, fish farming, aquarium farming, etc. It is the discharge and dispersion of...

Plastic elbow 1"1/2 female thread, PVC 150 mm - pos.6

Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...

The hose connects the pump to other equipment and reduces vibration and machine temperature. Hose length 1 m.

It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.