Podtlakový filtr pro vývěvy, připojení 1"1/4, papírový filtr 5÷7 µm poz. 4
Code: FC700005Related products
Additional parameters
| Category: | Příslušenství vývěvy Dmychadla |
|---|---|
| Warranty: | 6 měsíců-vyjma dílů podléhajícímu vysokému stupni opotřebení |
| Weight: | 3.2 kg |
| Připojení : | 1"1/4 |
| Papírový filtr: | 5÷7 µm |
| Pozice: | 4 |
It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.
Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.
Filter for Blower 2", 100 µm, pos. 9
Fine membrane diffusers are used in wastewater treatment, sludge aeration, drinking water treatment, fish farming, aquarium farming, etc. It is the discharge and dispersion of...
It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.
Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...
Filter for Blower 1"1/4, 100 µm, pos. 9
It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.
PVC plastic nipple, pos. 6
Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...
Safety relief valve, position 2. The safety valve protects against the risk of overpressure at the blower and underpressure at the vacuum pump. Reduces the operating pressure to...
The valve functions as a double vacuum/vacuum breaker with a central common threaded connection, pneumatically actuated by a double acting cylinder; thus it has 2 flat ports, 3...
Plastic elbow 2"1/2 female thread, PVC 150 mm - pos.6
Plastic elbow 4" female thread, PVC 150 mm - pos.6
PVC plastic nipple, pos. 6
It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.


