Plastic knee 2"1/2 internal thread, PVC 150 mm - poz.6
Code: BLKC065PSProduct detailed description
Accessories for Blower (BLOWERS)
Vacuum accessories (EXHAUSTERS)
Additional parameters
Category: | Příslušenství vývěvy Dmychadla |
---|---|
Warranty: | 6 měsíců-vyjma dílů podléhajícímu vysokému stupni opotřebení |
Weight: | 0.2 kg |
Materiál: | PVC |
? Připojení : | 2"1/2 f vnitřní závit |
Délka: | 150 mm |
Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...
Filter for Blower 1"1/4, 100 µm, pos. 9
Safety relief valve, position 2. The safety valve protects against the risk of overpressure at the blower and underpressure at the vacuum pump. Reduces the operating pressure to...
Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...
On-line silencer, connection male thread 1"1/2, position for both vacuum and discharge, pos. 7
On-line silencer, connection external thread 2", position for both vacuum and discharge, pos. 7
Filter for Blower 1"1/4, pos. 5 These filters are commonly installed on the suction side of side channel blowers and compressors to protect them from dust and solids that could...
Filter for Blower 2", 100 µm, pos. 9
On-line silencer, connection external thread 3", position for both vacuum and discharge, pos. 8
Filter for Blower 2", 100 µm, pos. 9
Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.
It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.
It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.
Safety relief valve, position 2. The safety valve protects against the risk of overpressure at the blower and underpressure at the vacuum pump. Reduces the operating pressure to...
On-line silencer, connection male thread 2"1/2, position for both vacuum and discharge, pos. 8
On-line silencer, connection external thread 3", position for both vacuum and discharge, pos. 7