Nipl 4" external thread, PVC 90 mm - teat, poz.6
Code: BLKC100PNProduct detailed description
Accessories for Blower (BLOWERS)

Vacuum accessories (EXHAUSTERS)

Additional parameters
| Category: | Příslušenství vývěvy Dmychadla |
|---|---|
| Warranty: | 6 měsíců-vyjma dílů podléhajícímu vysokému stupni opotřebení |
| Weight: | 0.2 kg |
| Materiál: | PVC |
| ? Připojení : | 4" m vnější závit |
| Délka: | 90 mm |
Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...
The valve functions as a double vacuum/vacuum breaker with a central common threaded connection, pneumatically actuated by a double acting cylinder; thus it has 2 flat ports, 3...
Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.
Filter for Blower 2", pos. 5 These filters are commonly installed on the suction side of side channel blowers and compressors to protect them from dust and solids that could...
Filter for Blower 3", pos. 5 These filters are commonly installed on the suction side of side channel blowers and compressors to protect them from dust and solids that could...
Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.
It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.
PVC plastic nipple, pos. 6
Plastic elbow 1"1/4 female thread, PVC 150 mm - pos.6
Plastic elbow 2" female thread, PVC 150 mm - pos.6
Plastic elbow 4" female thread, PVC 150 mm - pos.6
It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.
Plastic elbow 1"1/2 female thread, PVC 150 mm - pos.6
Fine membrane diffusers are used in wastewater treatment, sludge aeration, drinking water treatment, fish farming, aquarium farming, etc. It is the discharge and dispersion of...
Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.
The hose connects the pump to other equipment and reduces vibration and machine temperature. Hose length 1 m.
