Spare circulating round for blower-vacuum
Code: BLIM101 BLIM201 BLIM301 BLIM401 BLIM501 BLIM601 BLIM701 BLIM901 Choose variantProduct detailed description

Additional parameters
| Category: | Náhradní díly |
|---|---|
| Warranty: | 0 |
| Materiál: | Hliník |
The valve functions as a double vacuum/vacuum breaker with a central common threaded connection, pneumatically actuated by a double acting cylinder; thus it has 2 flat ports, 3...
The hose connects the pump to other equipment and reduces vibration and machine temperature. Hose length 1 m.
Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.
Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.
Fine tube diffusers are used in wastewater treatment, sludge aeration, drinking water treatment, fish farming, aquarium farming, etc. It is the discharge and dispersion of...
Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...
Plastic elbow 1"1/2 female thread, PVC 150 mm - pos.6
Plastic elbow 1"1/4 female thread, PVC 150 mm - pos.6
Fine tube diffusers are used in wastewater treatment, sludge aeration, drinking water treatment, fish farming, aquarium farming, etc. It is the discharge and dispersion of...
The hose connects the pump to other equipment and reduces vibration and machine temperature. Hose length 1 m.
The valve functions as a double vacuum/vacuum breaker with a central common threaded connection, pneumatically actuated by a double acting cylinder; thus it has 2 flat ports, 3...
Fine membrane diffusers are used in wastewater treatment, sludge aeration, drinking water treatment, fish farming, aquarium farming, etc. It is the discharge and dispersion of...
Safety relief valve, position 2. The safety valve protects against the risk of overpressure at the blower and underpressure at the vacuum pump. Reduces the operating pressure to...
Plastic elbow 4" female thread, PVC 150 mm - pos.6
Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.
It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.
