Diaphragm pump ARO 3/8" PVDF/Teflon, Output 40 l/min, pressure 8.3 bar
Code: PD03P-BLS-KTTRelated products


Air service kit for pump ARO PD03/05/07

ARO, valve seat, PVDF, 66605X-4XX, pos. 21

Air steering service kits ARO PD05 66605X-XXX. Service kit positions: 102, 119, 122, 130, 132, 137, 138, 139, 140, 141 and lubricant.

Set (4 pcs ) replacement O-rings, pos. 33, 93762 for pump ARO. Item "33" "O" rings are not used on models 66605H-XXX, 66605J-XXX and 66605K-XXX.

ARO, valve seat, PP, pos. 21

ARO, air service kit, PD10. The service kit includes positions 111, 132, 137, 138, 139, 166, 167, 171, 172, 173, 174, 176, 200,

ARO, air service kit, for pump ARO 1" -1 1/2" (PRO)

Hytrel diaphragm for pump ARO 6605 XXXXX

ARO, air sleeve, pos. 103


Santoprene diaphragm for air control PD10, pos. 176. For the pump it is necessary to use 2 diaphragms.

Air silencer ARO, pos. 201

Santoprene diaphragm for pump ARO PD10, pos. 7

ARO, air service kit, PD03/05/07

Product detailed description
Additional parameters
Category: | ARO diaphragm pump |
---|---|
Warranty: | 2 roky vyjma dílů podléhající vysokému stupni opotřebení |
Weight: | 2.6 kg |
Řada : | ARO |
Materiál tělesa čerpadla: | PVDF (Kynar) |
Materiál sedel čerpadla: | PVDF (Kynar) |
Materiál kuliček čerpadla: | Teflon |
Materiál membrán čerpadla: | Teflon |
Max. výkon: | 40,1 l/min |
Max. výtlak: | 6,9 bar |
pH: | 2 až 14 |
? Samonasávací schopnost: | -2,6 m |
Max. teplota média: | +93°C |
Max. velikost pevných částic: | max. 1,6 mm |
Připojení sání/výtlak: | Vnitřní závit 3/8" BSPT |
Pohon: | Stlačený vzduch max. 6,9 bar |
Připojení vzduch: | Vnitřní závit 1/4" |
ATEX: | NE |

Service kit for diaphragm pump ARO PD03 contains 2 pcs Teflon diaphragm, 2 pcs Santoprene backing diaphragm, 4 pcs Teflon balls, o-rings

Membrane pump ARO in material Hliník/Teflon. Output 54,5 l/min, discharge 8,3 bar. Including ATEX certificate.

Diaphragm pump ARO with side connection, flange version DN25. Material design Polypropylen, Santoprene balls and membranes, Output 200 l/min, discharge pressure 8,3 bar.


Membrane pump ARO in material Acetal/Teflon. The pump is suitable for pumping flammable liquids into hazardous areas.

Membrane pump ARO PD20A-BAP-GGG-B in material Hliník/Nitril, output 651 l/min, max 8.3 bar, connection internal thread 2".


Membrane pump ARO PD05P-BES-DTT-B with compressed air drive. Connection internal thread 1/2" BSP. Pump material Acetal/Teflon, max. output 54 l/min, discharge pressure 6.9 bar....

Membrane pump ARO in material Acetal/Teflon. The pump is suitable for pumping flammable liquids into hazardous areas.

Plastic barrel pump ARO PD05, max. output 54,5 l/min, suitable for neutral and abrasive media.

Diaphragm pump, output 133 l/min, discharge 8,3 bar, material cast iron, seats cast iron, diaphragms and balls Teflon.

Diaphragm pump ARO 66617B-222-C 1 in material version Stainless steel/Nitrile, 340 l/min, max. 8.3 bar, connection female thread 1 1/2".


Diaphragm pump, output 200 l/min, discharge 8.3 bar, material Hliník, seats Hliník, Santoprene diaphragms.

Membrane pump ARO in material Acetal/Teflon. The pump is suitable for pumping flammable liquids into hazardous areas.
-
Technický list (1.5 MB)
-
Servisní manuál (1.1 MB)
-
Katalog (388.8 kB)
-
Tabulka chemických odolností (4.3 MB)