Membránové čerpadlo ARO 1" Hliník/Santopren ATEX, Výkon 200 l/min, výtlak 8,3 bar
Code: PD10A-BCP-AAARelated products

ARO, valve seat, PVDF, 66605X-4XX, pos. 21

Santoprene diaphragm for air control PD10, pos. 176. For the pump it is necessary to use 2 diaphragms.

Air service kit for pump ARO PD03/05/07

ARO, air service kit, PD10. The service kit includes positions 111, 132, 137, 138, 139, 166, 167, 171, 172, 173, 174, 176, 200,


Santoprene wheel for pump ARO PD05P, pos. 22

ARO, air service kit, PD03/05/07

ARO, valve seat, PP, pos. 21

Santoprene diaphragm for pump ARO PD10, pos. 7

Santoprene diaphragm for pump ARO PD05P

Air steering service kits ARO PD05 66605X-XXX. Service kit positions: 102, 119, 122, 130, 132, 137, 138, 139, 140, 141 and lubricant.


Set (4 pcs ) replacement O-rings, pos. 33, 93762 for pump ARO. Item "33" "O" rings are not used on models 66605H-XXX, 66605J-XXX and 66605K-XXX.

Air silencer ARO, pos. 201

ARO, air sleeve, pos. 103

Santoprene diaphragm for pump ARO PD05P
Product detailed description
Additional parameters
Category: | ARO diaphragm pump |
---|---|
Warranty: | 2 roky vyjma dílů podléhající vysokému stupni opotřebení |
Weight: | 20.7 kg |
Řada : | ARO |
Materiál tělesa čerpadla: | Hliník |
Materiál sedel čerpadla: | Hliník |
Materiál kuliček čerpadla: | Santopren |
Materiál membrán čerpadla: | Santopren |
Max. výkon: | 200 l/min |
Max. výtlak: | 8,3 bar |
pH: | 2 až 14 |
? Samonasávací schopnost: | -5,7 m |
Max. teplota média: | |
Max. velikost pevných částic: | max. 3,2 mm |
Připojení sání/výtlak: | Vnitřní závit 1" BSPT |
Pohon: | Stlačený vzduch max. 6,9 bar |
Připojení vzduch: | Vnitřní závit 1/4" |
ATEX: | ANO |

Diaphragm pump ARO 1/4". Material Polypropylene, membranes and Santoprene beads. Output 40 l/min, displacement 8.3 bar. Pump is suitable for chemical solutions, acid alkalis,...



Diaphragm pump, output 133 l/min, discharge 8,3 bar, material cast iron, seats cast iron, diaphragms and balls Teflon.




Diaphragm pump ARO 66617B-222-C 1 in material version Stainless steel/Nitrile, 340 l/min, max. 8.3 bar, connection female thread 1 1/2".

Diaphragm pump ARO with side connection, flange version DN25. Material design Polypropylen, Santoprene balls and membranes, Output 200 l/min, discharge pressure 8,3 bar.

Membrane pump ARO in material Hliník/Teflon. Output 54,5 l/min, discharge 8,3 bar. Including ATEX certificate.

Membrane pump ARO in material Polypropylen/Teflon. Output 40 l/min, displacement 8.3 bar. The material design of the pump is suitable for acids, alkalis and various chemical...

Membrane pump ARO PD20A-BAP-GGG-B in material Hliník/Nitril, output 651 l/min, max 8.3 bar, connection internal thread 2".

Diaphragm pump, output 133 l/min, discharge 8,3 bar, material Hliník, seats Hliník, diaphragms and balls Teflon. Alternative replacement for pump ARO 666120-3C9-C

Membrane pump ARO. Material Polypropylen, membrane and Teflon beads. The pump is suitable for chemical solutions, acid alkalis, electroplating plants,... Membránové čerpadlo je...

Membrane pump ARO in material Acetal/Teflon. The pump is suitable for pumping flammable liquids into hazardous areas.
-
Katalogový list (196.3 kB)
-
Celkový katalog ARO (12 MB)
-
Tabulka chemických odolností (4.3 MB)
-
Manuál (1.1 MB)
-
Technický manuál (998 kB)
-
Technický list (182 kB)