Tubular diffuser 500-550 mm, EPDM, 3/4" M
Code: BLTD05ENProduct detailed description
The activated sludge process is the main stage of modern technology for wastewater treatment. The key is to ensure sufficient oxygen in the activated sludge process and to keep the slurry and solids in suspension.



Additional parameters
| Category: | Příslušenství vývěvy Dmychadla |
|---|---|
| Warranty: | 6 měsíců |
| Weight: | 1.4 kg |
| Materiál: | EPDM |
| Průměr: | 63-500 mm |
| ? Připojení vnější závit: | 3/4" f BSPP |
| Umístění : | Výtlak |
| ATEX certifikát: | NE |
| Effective-Total Lenght: | 500-550 mm |
| Efektivní oblast: | 0,10 m2 |
| Množství : | 2 až 8 m3 |
Fine membrane diffusers are used in wastewater treatment, sludge aeration, drinking water treatment, fish farming, aquarium farming, etc. It is the discharge and dispersion of...
Filter for Blower 3", pos. 5 These filters are commonly installed on the suction side of side channel blowers and compressors to protect them from dust and solids that could...
Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...
Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...
Fine tube diffusers are used in wastewater treatment, sludge aeration, drinking water treatment, fish farming, aquarium farming, etc. It is the discharge and dispersion of...
Fine tube diffusers are used in wastewater treatment, sludge aeration, drinking water treatment, fish farming, aquarium farming, etc. It is the discharge and dispersion of...
Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.
Filter for Blower 4", pos. 5 These filters are commonly installed on the suction side of side channel blowers and compressors to protect them from dust and solids that could...
Filter for Blower 2", 100 µm, pos. 9
Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.
Safety relief valve, position 2. The safety valve protects against the risk of overpressure at the blower and underpressure at the vacuum pump. Reduces the operating pressure to...
PVC plastic nipple, pos. 6
It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.
Filter for Blower 2" 1/2, pos. 5 These filters are commonly installed on the suction side of side channel blowers and compressors to protect them from dust and solids that could...
Filter for Blower 2", 100 µm, pos. 9
Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...
