Brass check valve 2" pozice 12
Code: BLCV050BRProduct detailed description
Accessories for Blower (BLOWERS)
Vacuum accessories (EXHAUSTERS)
Additional parameters
Category: | Příslušenství vývěvy Dmychadla |
---|---|
Warranty: | 0 |
Weight: | 1 kg |
Materiál: | Mosaz |
Připojení : | 2" |
Pozice: | 12 |

Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.

Fine membrane diffusers are used in wastewater treatment, sludge aeration, drinking water treatment, fish farming, aquarium farming, etc. It is the discharge and dispersion of...

Filter for Blower 1"1/4, 100 µm, pos. 9

Safety relief valve, position 2. The safety valve protects against the risk of overpressure at the blower and underpressure at the vacuum pump. Reduces the operating pressure to...

Safety relief valve, position 2. The safety valve protects against the risk of overpressure at the blower and underpressure at the vacuum pump. Reduces the operating pressure to...

It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.

It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.

The hose connects the pump to other equipment and reduces vibration and machine temperature. Hose length 1 m.

It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.

Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...

Filter for Blower 1"1/2, 100 µm, pos. 9

Filter for Blower 2", pos. 5 These filters are commonly installed on the suction side of side channel blowers and compressors to protect them from dust and solids that could...

Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...

It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.

PVC plastic nipple, pos. 6

Plastic elbow 2"1/2 female thread, PVC 150 mm - pos.6