Filter for Blower 1"1/2, pos. 5
Code: FCM70008Product detailed description
Accessories for Blower (BLOWERS)
Additional parameters
Category: | Příslušenství vývěvy Dmychadla |
---|---|
Warranty: | 6 měsíců-vyjma dílů podléhajícímu vysokému stupni opotřebení |
Weight: | 2 kg |
Připojení: | 1"1/2 |
Papírový filtr: | 5÷7 µm |

Filter for Blower 4", pos. 5 These filters are commonly installed on the suction side of side channel blowers and compressors to protect them from dust and solids that could...

Safety relief valve, position 2. The safety valve protects against the risk of overpressure at the blower and underpressure at the vacuum pump. Reduces the operating pressure to...

PVC plastic nipple, pos. 6

Filter for Blower 2", pos. 5 These filters are commonly installed on the suction side of side channel blowers and compressors to protect them from dust and solids that could...

PVC plastic nipple, pos. 6

Fine tube diffusers are used in wastewater treatment, sludge aeration, drinking water treatment, fish farming, aquarium farming, etc. It is the discharge and dispersion of...

Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.

Plastic elbow 1"1/2 female thread, PVC 150 mm - pos.6

Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...

The valve functions as a double vacuum/vacuum breaker with a central common threaded connection, pneumatically actuated by a double acting cylinder; thus it has 2 flat ports, 3...

Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.

Filter for Blower 1"1/2, 100 µm, pos. 9

It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.

Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...

Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.

Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...