Diaphragm pump ARO 1/2" Polypropylen/Teflon, Performance 49.2 l/min, pressure 6.9 bar
Code: 66605J-344Related products

Service kit for diaphragm pump ARO PD03 contains 2 pcs Teflon diaphragm, 2 pcs Santoprene backing diaphragm, 4 pcs Teflon balls, o-rings

Santoprene wheel for pump ARO PD05P, pos. 22

Air service kit for pump ARO PD03/05/07

Hytrel diaphragm for pump ARO 6605 XXXXX

Santoprene diaphragm for air control PD10, pos. 176. For the pump it is necessary to use 2 diaphragms.


Set (4 pcs ) replacement O-rings, pos. 33, 93762 for pump ARO. Item "33" "O" rings are not used on models 66605H-XXX, 66605J-XXX and 66605K-XXX.

Santoprene diaphragm for pump ARO PD05P

ARO, air service kit, for pump ARO 1" -1 1/2" (PRO)

ARO, air service kit, PD10. The service kit includes positions 111, 132, 137, 138, 139, 166, 167, 171, 172, 173, 174, 176, 200,



Santoprene diaphragm for pump ARO PD05P

ARO, valve seat, PVDF, 66605X-4XX, pos. 21

ARO, valve seat, PP, pos. 21

ARO, air sleeve, pos. 103
Product detailed description
Additional parameters
Category: | ARO diaphragm pump |
---|---|
Warranty: | 1 rok vyjma dílů podléhajícímu vysokému stupni opotřebení |
Weight: | 8 kg |
Řada : | ARO |
Materiál tělesa čerpadla: | Polypropylen |
Materiál sedel čerpadla: | Polypropylen |
Materiál kuliček čerpadla: | PTFE (Teflon) |
Materiál membrán čerpadla: | PTFE (Teflon) |
Max. výkon: | 49,2 l/min |
Max. výtlak: | 6,9 bar |
pH: | 2 až 14 |
? Samonasávací schopnost: | -2,6 m |
Max. teplota média: | +2° až +66°C |
Max. velikost pevných částic: | max. 2,4 mm |
Připojení sání/výtlak: | Vnitřní závit 1/2" BSPT |
Pohon: | Stlačený vzduch max. 6,9 bar |
Připojení vzduch: | Vnitřní závit 1/4" |
ATEX: | NE |

Diaphragm pump, output 200 l/min, discharge 8.3 bar, material Hliník, seats Hliník, Santoprene diaphragms.

Membrane pump ARO PD05-BDS-DTT-B with compressed air drive. Connection internal thread 1/2" BSP. Pump material Acetal/Teflon. Max. output 54 l/min, discharge pressure 6.9 bar....

FDA certified, compressed air driven food grade diaphragm pump ARO PM15A-CSS-STT-A02. Internal Tri-Clamp 2" BSP connection. Pump material Stainless steel/Teflon. Max. output...

Membránové čerpadlo ARO 1" Polypropylén / SANTOPRENE, Výkon 178 l / min, výtlak 8,3 bar. Materiál Polypropylen, membrány a kuličky Santopren. Čerpadlo je vhodné pro chemické...

Plastic drum pump ARO PD05, max. output 54,5 l/min, suitable for chemicals.

Diaphragm pump ARO with 1" BSP female thread, middle connection. Material Polypropylen/Teflon, Output 178 l/min, displacement 8,3 bar



Membrane pump ARO in material Acetal/Teflon. The pump is suitable for pumping flammable liquids into hazardous areas.

Membrane pump ARO PD20A-BAP-GGG-B in material Hliník/Nitril, output 651 l/min, max 8.3 bar, connection internal thread 2".

Membrane pump ARO in PVDF/Teflon material. Output 40 l/min, displacement 8.3 bar. The pump material design is suitable for concentrated acids and alkalis

Diaphragm pump ARO 1/4". Material Polypropylene, membranes and Santoprene beads. Output 40 l/min, displacement 8.3 bar. Pump is suitable for chemical solutions, acid alkalis,...

Membrane pump ARO PD05P-BES-DTT-B with compressed air drive. Connection internal thread 1/2" BSP. Pump material Acetal/Teflon, max. output 54 l/min, discharge pressure 6.9 bar....
-
Technický list (427.5 kB)
-
Manuál ang. (927.3 kB)
-
Celkový katalog (35.5 MB)
-
Tabulka chemických odolností (4.3 MB)
-
Manuál (358.9 kB)
-
CE (79.7 kB)