Diaphragm pump ARO 1/2" Polypropylen/Santoprene, Performance 49.2 l/min, pressure 6.9 bar
Code: 66605J-3EBRelated products


Air service kit for pump ARO PD03/05/07

ARO, air service kit, PD03/05/07

Air steering service kits ARO PD05 66605X-XXX. Service kit positions: 102, 119, 122, 130, 132, 137, 138, 139, 140, 141 and lubricant.

Set (4 pcs ) replacement O-rings, pos. 33, 93762 for pump ARO. Item "33" "O" rings are not used on models 66605H-XXX, 66605J-XXX and 66605K-XXX.


Air silencer ARO, pos. 201

Santoprene wheel for pump ARO PD05P, pos. 22


ARO, air sleeve, pos. 103


ARO, valve seat, PP, pos. 21

Santoprene diaphragm for air control PD10, pos. 176. For the pump it is necessary to use 2 diaphragms.

Santoprene diaphragm for pump ARO PD05P

ARO, valve seat, PVDF, 66605X-4XX, pos. 21

Service kit for diaphragm pump ARO PD03 contains 2 pcs Teflon diaphragm, 2 pcs Santoprene backing diaphragm, 4 pcs Teflon balls, o-rings
Product detailed description
Additional parameters
Category: | ARO diaphragm pump |
---|---|
Warranty: | 1 rok vyjma dílů podléhajícímu vysokému stupni opotřebení |
Weight: | 8 kg |
Řada : | ARO |
Materiál tělesa čerpadla: | Polypropylen |
Materiál sedel čerpadla: | Polypropylen |
Materiál kuliček čerpadla: | Santopren |
Materiál membrán čerpadla: | Santopren |
Max. výkon: | 49,2 l/min |
Max. výtlak: | 6,9 bar |
pH: | 2 až 14 |
? Samonasávací schopnost: | -2,6 m |
Max. teplota média: | +2° až +66°C |
Max. velikost pevných částic: | max. 2,4 mm |
Připojení sání/výtlak: | Vnitřní závit 1/2" BSPT |
Pohon: | Stlačený vzduch max. 6,9 bar |
Připojení vzduch: | Vnitřní závit 1/4" |
ATEX: | NE |

Membrane pump ARO. Material Polypropylen, membrane and Teflon beads. The pump is suitable for chemical solutions, acid alkalis, electroplating plants,... Membránové čerpadlo je...

Membrane pump ARO in material Hliník/Teflon. Output 54,5 l/min, discharge 8,3 bar. Including ATEX certificate.

Diaphragm pump ARO 1/4". Material Polypropylene, membranes and Santoprene beads. Output 40 l/min, displacement 8.3 bar. Pump is suitable for chemical solutions, acid alkalis,...

Diaphragm pump ARO 1/4". Material Polypropylene, membranes and Santoprene beads. Output 40 l/min, displacement 8.3 bar. Pump is suitable for chemical solutions, acid alkalis,...

Diaphragm pump ARO 6665J-344 with compressed air drive. Connection internal thread 1/2" BSP. Pump material Polypropylen/Teflon. Max. output 49,2 l/min at water, discharge...

Membrane pump ARO PD20A-BAP-GGG-B in material Hliník/Nitril, output 651 l/min, max 8.3 bar, connection internal thread 2".

Plastic drum pump ARO PD05, max. output 54,5 l/min, suitable for chemicals.


Membrane pump ARO in material Acetal/Teflon. The pump is suitable for pumping flammable liquids into hazardous areas.


Membrane pump ARO in material Acetal/Teflon. The pump is suitable for pumping flammable liquids into hazardous areas.

Membrane pump ARO in PVDF/Teflon material. Output 40 l/min, displacement 8.3 bar. The pump material design is suitable for concentrated acids and alkalis

Diaphragm pump, output 133 l/min, discharge 8,3 bar, material Hliník, seats Hliník, diaphragms and balls Teflon.
-
Tabulka chemických odolností (4.3 MB)
-
Manuál (358.9 kB)
-
CE (79.7 kB)
-
Technický list (427.5 kB)
-
Manuál ang. (927.3 kB)
-
Celkový katalog (35.5 MB)