Pressure switch programmable G 1/4 AND AP014

Code: AP014

€462 / pcs €559 incl. VAT €462 / 1 pcs

Delivery to: 09/05/2024

Metal thin-film cell
Function programmable
IO-Link devices

The AP014 electronic pressure switch has a metal thin-film cell and a G 1/4 I process connection. The device has 2 outputs (programmable NO / NC), whose function is programmable. The AP014 has a measuring range of 0 ... 250 bar / 0 ... 3625 psi / 0 ... 25 MPa and a 4-digit alphanumeric display, as well as red and green color change display. The device also has an IO-Link facility

Detailed information

Show all related products

Product detailed description

Technical data AP014

General information

Application Liquid and gaseous media

Pressure type Relative pressure

Pressure measurement range min.0 bar

Pressure measurement range Maximum 250 bar

Switching frequency 170 Hz

Burst pressure 1100 bar

Compressive strength 500 bar

Process connection G 1/4 female thread

Outputs / inputs

Switched output 2 x normally open/normally closed programmable

IO-Link Yes

Electrical data

Short circuit protection Yes

Operating voltage 18 ... 30 V DC

Surge protection Yes

Overload Yes

DC voltage

Electrical design PNP/NPN
Programmable

Current carrying capacity max.150 mA

Voltage drop max.2.5 V

Protection class III

Current consumption max.35 mA

Mechanical data

Materials in contact with V4A (1.4542)

Tightening torque of the coupling nut25... 35 Nm

Switching cycles Minimum 100 million

Housing material V4A (1.4404)
PC
PBT + PC-GF 30
PBT-GF 20
V4A (1.4542)

Connect gold-plated M12 contacts with 4-pin contacts

accuracy

Hysteresis<± 0.25%

Resolution 1 bar

Standby delay time 0 .3 s

Reproducibility<± 0.1%

Switch point accuracy<± 0.5%

Linearity deviation<± 0.25% (BFSL)

Delay adjustable 0 ... 50 s

environmental conditions

Ambient temperature min. -25°C

Ambient temperature max.80°C

Medium temperature-25... 80°C

Degree of protection IP65/IP67

Further information

MTTF201

Function indicator yellow/green
3 x LED
2 x LED
programming buttons

Accessories included No accessories

EMC testing DIN EN 61000-6-2
DIN EN 61000-6-3

Impact resistance test DIN EN 60068-2-27

Vibration resistance test DIN EN 60068-2-6

Pressure Equipment Directive Good engineering practice

CE approval
cULus

Drawing Legend1: 4-position alphanumeric display / change indicator (red and green)
2: LEDs (signalling unit / switching status),
3: Programming button
4: Upper part of the housing 345° rotation

Connection and pin assignment