Handheld mobile oil filler 25 l, hose 1.5 m with valve and bent ending
Code: 325000Related products
Mobile lubrication press includes : PM 3 - 55:1 high pressure pneumatic pump for 20 drums 404 100 with top cover for 20 kg drum 418 002, 2 m x 1/4" dispensing hose 412102...
The mechanical diesel flowmeter can also be used for gravity dispensing. Resettable flow meter up to 999.9 litres and the total meter has 6 digits. 1" BSP (F) input/output, or...
PM2 pneumatic piston pump for pumping lubricants from mobile and stationary equipment. Pump size 2" BSP (M) adapter for attachment to container or drum. Plug for the possibility...
Dispensing of lubricating oils for 205 l drums or 1,000 l IBC containers, trolley, pneumatic pump 3:1 into the drum. Dispensing hose 3 m, gun with electronic gauge.
Diesel pump set including digital flow meter, dispensing gun, 4 dispensing hoses, 2 m suction pipe, 24V DC power supply. Flow meter is valid only for non-commercial purposes
The battery lubrication press is designed for standard cartridges or filling from a barrel. Achieves high pressures up to 675 bar (limited to 500 bar by safety valve) and...
70 litre combination extractor with used oil tank with funnel. Suction can be carried out independently if a vacuum is created in the vessel. Emptying by pressurisation via a...
Multi-diaphragm pump without mechanical seals, designed for pumping AdBlue®/DEF. Self-priming capability, by-pass valve. Electric motor IP55 protection and on/off switch, fuse...
Foot-operated, highly resistant lubricating press. Spring-loaded wiper cover and pump mechanism made of cast iron guarantee use even for extremely viscous lubricants The sealed...
Diesel pump set including digital flow meter (PN 680 300), dispensing gun, 4 dispensing hoses, suction pipe, 12V DC power supply. Flow meter is valid only for non-commercial...
Lever operated hand drum pump for dispensing low viscosity lubricating oils from 60 - 205 litre drums. All-metal construction of pump, discharge pipe and telescopic suction...
Self-priming vane pump. Pump material cast iron with stainless steel finish, steel rotor and blades made of acetyl resin. Pump including by-pass valve and built-in filter with...
The battery lubrication press is designed for standard cartridges or filling from a barrel. Achieves high pressure up to 700 bar - 10000 psi (limited to 500 bar by safety valve)...
Product detailed description
No product's description available
Additional parameters
| Category: | Mazací technika SAMOA Industrial |
|---|---|
| Weight: | 15.2 kg |
| Vhodné kapaliny: | olej |
| Objem zásobníku: | 25 l |
| Délka vysokotlaké hadice: | 1,5 m |
| Čerpadlo: | ruční |
