Spare circulating round for blower-vacuum
Code: BLIM101 BLIM201 BLIM301 BLIM401 BLIM501 BLIM601 BLIM701 BLIM901 Choose variantProduct detailed description
Additional parameters
Category: | Náhradní díly |
---|---|
Warranty: | 0 |
Materiál: | Hliník |

Plastic elbow 1"1/4 female thread, PVC 150 mm - pos.6

Filter for Blower 4", pos. 5 These filters are commonly installed on the suction side of side channel blowers and compressors to protect them from dust and solids that could...

Filter for Blower 2", pos. 5 These filters are commonly installed on the suction side of side channel blowers and compressors to protect them from dust and solids that could...

It is used to prevent backflow, especially during the start and stop of the blower. Flap pos.12 must be installed at the outlet.

Fine membrane diffusers are used in wastewater treatment, sludge aeration, drinking water treatment, fish farming, aquarium farming, etc. It is the discharge and dispersion of...

Fine tube diffusers are used in wastewater treatment, sludge aeration, drinking water treatment, fish farming, aquarium farming, etc. It is the discharge and dispersion of...

Set of rubber feet for horizontal mounting of the blower. Set contains 4 pieces.

PVC plastic nipple, pos. 6

Filter for Blower 1"1/2, 100 µm, pos. 9

PVC plastic nipple, pos. 6

The hose connects the pump to other equipment and reduces vibration and machine temperature. Hose length 1 m.

Filter for Blower 1"1/4, 100 µm, pos. 9

Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...

Filter on the suction line of the vacuum pump to create vacuum, paper filter 5÷7, position 4. These filters are normally installed in the pump intake to protect it from dust and...

Plastic elbow 2"1/2 female thread, PVC 150 mm - pos.6

Plastic elbow 1"1/2 female thread, PVC 150 mm - pos.6