Diaphragm pump ARO 1" Polypropylen/Santoprene, Output 200 l/min, pressure 8.3 bar Výkon 200 l/min, výtlak 8,3 bar
Code: PD10P-FPS-PAARelated products

Set (4 pcs ) replacement O-rings, pos. 33, 93762 for pump ARO. Item "33" "O" rings are not used on models 66605H-XXX, 66605J-XXX and 66605K-XXX.

Santoprene diaphragm for pump ARO PD10, pos. 7

ARO, air sleeve, pos. 103

ARO, air service kit, PD03/05/07


Santoprene diaphragm for pump ARO PD05P

Santoprene diaphragm for air control PD10, pos. 176. For the pump it is necessary to use 2 diaphragms.

ARO, air service kit, for pump ARO 1" -1 1/2" (PRO)

Air service kit for pump ARO PD03/05/07

Hytrel diaphragm for pump ARO 6605 XXXXX


Santoprene wheel for pump ARO PD05P, pos. 22

ARO, valve seat, PVDF, 66605X-4XX, pos. 21



Santoprene diaphragm for pump ARO PD05P
Product detailed description
Additional parameters
Category: | ARO diaphragm pump |
---|---|
Warranty: | 1 year |
Weight: | 9 kg |
Řada : | ARO |
Materiál tělesa čerpadla: | Polypropylen |
Materiál sedel čerpadla: | Polypropylen |
Materiál kuliček čerpadla: | Santopren |
Materiál membrán čerpadla: | Santopren |
Max. výkon: | 200 l/min |
Max. výtlak: | 8,3 bar |
pH: | 2 až 14 |
? Samonasávací schopnost: | -5,7 m |
Max. teplota média: | |
Max. velikost pevných částic: | max. 3,2 mm |
Připojení sání/výtlak: | Přírubové provedení DN 25 |
Pohon: | Stlačený vzduch max. 6,9 bar |
Připojení vzduch: | Vnitřní závit 1/4" |
ATEX: | NE |

Plastic diaphragm pump ARO in material version polypropylene, diaphragm and Santoprene beads. Max. pump output Pump material design 465 l/min, max. discharge 8.3 bar. The...

Diaphragm pump, output 133 l/min, discharge 8,3 bar, material Hliník, seats Hliník, diaphragms and balls Teflon. Alternative replacement for pump ARO 670021 (66120-389-C)


Membrane pump ARO PD05P-BRS-PAA-B with compressed air drive. Connection internal thread 1/2" BSP. Pump material Polypropylen/Santoprene, max. output 54 l/min, discharge pressure...

Diaphragm pump ARO 1" Stainless steel/Teflon, Performance 197 l/min, discharge pressure 8,3 bar

FDA certified, compressed air driven food grade diaphragm pump ARO PM15A-CSS-STT-A02. Internal Tri-Clamp 2" BSP connection. Pump material Stainless steel/Teflon. Max. output...

Membrane pump ARO in material Polypropylen/Teflon. Output 40 l/min, displacement 8.3 bar. The material design of the pump is suitable for acids, alkalis and various chemical...

Membrane pump ARO. Material Polypropylen, membrane and Teflon beads. The pump is suitable for chemical solutions, acid alkalis, electroplating plants,... Membránové čerpadlo je...


Membrane čerpadlo. Materiál Polypropylen, membrány a kuličky Santopren. Čerpadlo je vhodné pro chemické roztoky, kyseliny louhy, galvanické provozy, galvanické lázně. The...

Membrane pump ARO PD05P-BES-DTT-B with compressed air drive. Connection internal thread 1/2" BSP. Pump material Acetal/Teflon, max. output 54 l/min, discharge pressure 6.9 bar....

Diaphragm pump ARO 66605J-3EB with compressed air drive. Connection internal thread 1/2" BSP. Pump material Polypropylen/Santoprene. Max. output 49,2 l/min at water, discharge...

Diaphragm pump ARO 1/4". Material Polypropylene, membranes and Santoprene beads. Output 40 l/min, displacement 8.3 bar. Pump is suitable for chemical solutions, acid alkalis,...

Diaphragm pump ARO with 1" BSP female thread, middle connection. Material Polypropylen/Teflon, Output 178 l/min, displacement 8,3 bar

Membrane pump ARO in material Acetal/Teflon. The pump is suitable for pumping flammable liquids into hazardous areas.
-
Katalogový list (503.9 kB)
-
Tabulka chemických odolností (4.3 MB)
-
Technický list (293.9 kB)
-
Náhradní díly (606.3 kB)