Valve kit Bypass 100PSI Nylon/EPDM
Code: 94-391-37Related products
For pumps SHURFLO 2088, 2095, 8000 and 8030. For the following types of Shurflo pumps:2088-264-144, 2088-414-534, 2088-443-144, 2088-473-143, 2088-474-144, 2088-483-124,...
For pumps SHURFLO 8000 and 8025. For the following types of Shurflo pumps:8000-443-136, 8000-443-236, 8000-532-256, 8000-541-236, 8000-542-136, 8000-543-136, 8000-543-236,...
Pump head housing for SHURFLO 8000-933-250, 8025-733-256, 8090-911-250, 8090-951-250, 8090-961-250
Pump head housing for SHURFLO pumps 8000-043-235, 8000-633-236, 8000-643-210, 8000-643-236, 8000-713-238, 8000-783-238, 8000-812-280, 8000-812-288
For pumps SHURFLO 2087 and 2088. 2087-593-135, 2088-313-145, 2088-343-135, 2088-344-500, 2088-394-144, 2088-394-154, 2088-873-515
Diaphragm kit for SHURFLO 8000, 8007, 8020 and 8090 pumps 8000-033-236, 8000-343-236, 8000-533-236, 8000-541-236, 8000-542-136, 8000-543-136, 8000-543-138, 8000-543-236,...
Service kit R-ebell carbon kit 12 V DC for SHURFLO 2088, 2095, 8000 and 8030 pumps.
Pump head housing for SHURFLO pumps 8000-033-236,8000-151-296, 8000-343-236, 8000-443-236, 8000-532-256, 8000-533-236, 8000-533-250, 8000-541-236, 8000-543-210, 8000-543-220,...
Diaphragm kit for pumps SHURFLO 8005, 8007, 8020, 8025
Product detailed description
- For types with installed valve kit in Nylon, EPDM and springs for approx. 100 PSI: 8000-941-260, 8005-932-260, 8000-952-899, 8000-952-289, 8095-902-260.
- This is a universal valve kit with By-Pass and springs for about 100 PSI.
If a By-pass with a different opening pressure value is used in the pump, the springs can be retained from the original part and thus the original opening pressure value can be maintained. During operation, it is the elastomers of the valve set and not the springs that are subject to wear. The need to replace them is usually only related to their loss during disassembly.
The kit can also be used when an existing pump with By-Pass (e.g. 8000-955-280 with By-Pass 80 PSI) needs to be pressurized. By installing the 94-391-37 kit (or the springs from this kit), it will increase to 100 PSI. After installation, we recommend monitoring the engine temperature, which may or may not increase (e.g., when the pump is running for short intervals). The temperature increase can be solved by installing external cooling fins (ACCESSORIES menu) or an external fan (very often PC fans).
Additional parameters
Category: | Náhradní díly SHURflo |
---|---|
Warranty: | 0 |
Weight: | 0.5 kg |