Handheld lever grease gun with a tube and lubricating ending
Code: 101240Related products

The pump set includes a 4 m x 19 mm EPDM dispensing hose and accessories: holder, gun, gauge, suction kit (depending on model).

The battery lubrication press is designed for standard cartridges or filling from a barrel. Achieves high pressures up to 675 bar (limited to 500 bar by safety valve) and...

Mobile lubrication press includes : PM 3 - 55:1 high pressure pneumatic pump for 20 drums 404 100 with top cover for 20 kg drum 418 002, 2 m x 1/4" dispensing hose 412102...

Self-priming pump with automatically adjustable blades. Pump body cast iron with corrosion protection, rotor made of steel, blades made of acetyl resin. The pump is equipped...

70 litre combination extractor with used oil tank with funnel. Suction can be carried out independently if a vacuum is created in the vessel. Emptying by pressurisation via a...

Multi-diaphragm pump without mechanical seals, designed for pumping AdBlue®/DEF. Self-priming capability, by-pass valve. Electric motor IP55 protection and on/off switch, fuse...

Foot-operated, highly resistant lubricating press. Spring-loaded wiper cover and pump mechanism made of cast iron guarantee use even for extremely viscous lubricants The sealed...

PM2 pneumatic piston pump for pumping lubricants from mobile and stationary equipment. Pump size 2" BSP (M) adapter for attachment to container or drum. Plug for the possibility...

Lever operated hand drum pump for dispensing low viscosity lubricating oils from 60 - 205 litre drums. All-metal construction of pump, discharge pipe and telescopic suction...

Dispensing of lubricating oils for 205 l drums or 1,000 l IBC containers, trolley, pneumatic pump 3:1 into the drum. Dispensing hose 3 m, gun with electronic gauge.

Self-priming vane pump. Pump material cast iron with stainless steel finish, steel rotor and blades made of acetyl resin. Pump including by-pass valve and built-in filter with...

Used oil tank (70l) with funnel, overpressure emptying via 1.5 m long hose, pressurizing the tank to 0.5 bar (3.5 psi). Includes safety valve against overpressure.

Diesel pump set including mechanical flow meter (PN 680 300), dispensing gun, dispensing hose 4, suction pipe, 230V power supply. Flow meter is valid only for non-commercial...
Product detailed description
Additional parameters
Category: | Mazací technika SAMOA Industrial |
---|---|
Warranty: | 2 roky vyjma dílů podléhající vysokému stupni opotřebení |
Weight: | 0.5 kg |